SEE ALSO参考

Refer to the following sections for the input processing, output processing, and alarm processing that are common to a multiple number of regulatory control blocks. 参考以下关于输入处理，输出处理和报.警处理的章节，这些都是大多数调整控制块的公共部分SAI533-H53。

• For input processing, see chapter C3, “Input Processing.”

• For output processing, see chapter C4, “Output Processing.”

• For alarm processing, see chapter C5, “Alarm Processing - FCS.”

The characteristics and control computation processing functions of the regulatory control blocks are explained as control action in the sections for individual function blocks in the chapters from D1.3.在D1.3单独的功能块介绍部门中，调整控制块的特性和控制计算处理功能将作为控制作用予以解释SAI533-H53。

The characteristics and control computation processing of each regulatory control block, as well as any input processing, output processing, and alarm processing that are inherent to particular regulatory control blocks are explained in the sections beginning with D1.2 for each function block.每个调整控制块，包括任何输入处理，输出处理和报.警处理的特性和控制计算处理是每个特殊的调整控制块的国有特性，在D1.2的开始我们将对每个功能块予以解释SAI533-H53。

<Toc> <Ind> <D1.1 Regulatory Control Blocks> D1-4

IM 33S01B30-01E 9th Edition : Dec.16,2002-00

D1.1.1 Types of the Regulatory Control Blocks调整控制块的类型

The regulatory control blocks vary by the types of data handled and control computation processing functions provided. The blocks are classified into these blocks below.调整控制块是根据控制计算处理功能提供的数据类型和处理数据的类型来分类的。可以分为以下几种模块：

• Input Indicator Blocks   输入指示器块

• Controller Blocks        控制器块SAI533-H53

• Manual Loader Blocks    手动加载块

• Signal Setter Blocks      信号设置器块

• Signal Limiter Blocks     信号限制器块

• Signal Selector Blocks    信号选择器块

• Signal Distributor Blocks  信号分配器块

• Pulse Count Input Block   脉冲计数输入块

• Alarm Block               报.警块

• YS Blocks                 YS块

■ Input Indicator Blocks   输入指示器块

The table below shows a list of input indicator blocks:下表说明一列输入指示器块

PVI：输入指示块

PVI-DV：输入指示块带偏差报.警